Skip to main content

Jugnu: India's first Nano Satellite

          IIT-Kanpur with its nano satellite 'Jugnu' has set new highs in the field of space research. A team of students, working under Dr NS Vyas (the visionary man behind the making of the nano-satellite) and other faculty members of the institute, have successfully made the country's first nano-satellite to be developed for the first time by any educational institute.

          The development of the Jugnu started in the year 2008 with a team of 3 students. With time, the team has grown to the size of more than 50 students ranging from 1st year undergraduates to final year postgraduates and 14 professors from different disciplines to complete this challenging mission.
           The satellite has been handed over to two ISRO scientists, DVA Raghav Murthy (Project Director, Small Satellite Projects) and Dr SK Shiv Kumar (Director, ISRO satellite tracking centre), by President Pratibha Patil on March 6, 2010. View the pictures of the ceremony at IIT Kanpur's photo gallery.

          Golden Jubilee year of IIT Kanpur(Aug 2009- Dec 2010) will witness the launch of Jugnu from Satish Dhawan Space Centre (also known as SHAR, located in Sriharikota, Andhra Pradesh) by ISRO’s Polar Satellite Launch Vehicle. Jugnu will be able to withstand the harshness of space environment for its estimated life span of 1 year.
             
          Weighing less than three kg and with most functionalities of a normal satellite on a small platform, the payload of the satellite will include an indigenously designed camera for near remote sensing and a GPS receiver. 'Jugnu' will transmit blinking signal at all times, all over the Earth. It will revolve around the Earth 15 times a day in polar orbit and will be visible over Kanpur for three to four times for a total of 20 minutes. After its launch, Jugnu will be continuously monitored and controlled by Ground Station located on the IIT Kanpur campus.
          The main objectives behind making a nano satellite were to serve the following applications:
1. Micro Imaging System
2. GPS receiver for locating the position of satellite in the orbit
3. MEMS based IMU (Inertial Measurement Unit)

Comments

Post a Comment

Please leave your comments here...

Recommended for You

Is Google cheating?

               I found this piece of interesting fact, accidently while browsing the internet. Google shows different maps for India, China and USA. Confused hun! Well don’t be…Just read on… In Indian version of Google Maps, you can see Arunachal Pradesh and eastern part of Jammu and Kashmir as integral part of India. In US version of Google Maps, you can see Arunachal Pradesh and Jammu and Kashmir as a disputed region. In the Chinese version of the Google Maps, you can see Arunachal Pradesh and JnK as not a part of India.                 Many people complained this issue to Google. A Google employee responded : “ We do show different versions of this border, because we required to by law. Indian law requires us to show it one way, and the Chinese law requires us to show it another way . If we can legally do so, we strive to present borders in a neutral and objective manner, which is why the US version avoids taking either side and simply labels the border as disputed. ”   

Custom online cards from Google Maps...

            Share a message of holiday cheer with custom online cards from Google Maps this New Year! Think Green, Go Green this New Year. Save paper and that too with a difference! This new year you can send your friends, family and loved ones an e-card which is out of the box!             You can choose from 10 different online holiday cards and add your personal message. Now, after reading this you will think what's so different here! The surprise is yet to unfold...You can include specific directions, a Street view image or your favorite place on the inside of the card!             So now planning your New Year party will become easier. You can send an e-card with directions from your friend's place to the place where you are hosting your New Year party! Won't that be fun!             You can send your personalized Google Maps New Year Cards from here !             Warm wishes for a great holiday season and wish you a Happy Mapping Year...

Map Loading...

    The blank web page seems so boring and dull when the map is still loading. You will come across such a situation quite often where you will be having a slow internet connection! We cannot do anything about the slow internet connection, but we can surely avoid the dull blank web-page by using a simple trick. We can place a "loading" image at the center of the web page so that the page doesn't look blank! An image like this:             The following code will show you how this can be done and here it is!     As you all can see the code is very very simple and the output will look as seen in the results section above. The image below shows the loading stage of the map.       Do let me know what you think about the examples shared here! Do leave your comments here! Till the next example, happy mapping!

GIS Technology to identify all properties in BBMP Limits

          The Bruhat Bangalore Mahanagara Palike (BBMP) has for the last two years, been in the process of conducting a massive exercise to map the 13.87 lakh properties in the 198 wards in the city. Geographical Information System (GIS) has proven to be an effective tool for analysing and displaying thematic maps of all the roads for proper evaluation and correction of zones.            As of now, 11 lakh properties have come under the tax net. The aim of this programme, which is perhaps the first such exercise being conducted in the country on such a large scale, covering 800 square km, is to bring all properties under the tax net and ensure that the BBMP has accurate information pertaining to the properties’ dimension, built-up area, land use and classification. The process of validation of GIS maps will be completed in January 2011.           The process uses satellite digital maps of the BBMP area to generate a vector map from the information obtained. These high r

Retriving co-ordinates...

         We have seen 2 Google Maps API v3 examples wherein we have retrieved the latitude-longitude co-ordinates of the point of click on the map. In the first example we have displayed the co-ordinates in the information window and in the second , we have displayed the co-ordinates in a form in the information window.         Today we will create a code to retrieve the latitude longitude co-ordinates in a text box while simultaneously a marker appears on the map as well. So, here goes the code. <html> <head> <title> Google Maps API v3 - Adding marker on Click and retrieving the co-ordinates in a text box </title> <script type="text/javascript" src="http://maps.google.com/maps/api/js?sensor=false"></script> <script type="text/javascript"> var map;    //When using event as a parameter to a function declare map, strictly as a global variable function initialize() {     var myLatlng = new google.maps.L