Skip to main content

Two maps on the same page - Side-by-side

    How good I am feeling to post a code example after such a long time! It's been all "news" over the past so many posts! Well now that I am finally doing a code example, I am posting a very highly requested code sample. Placing two Google Maps on the same page (Now that's simple you would say!), but side by side. Now this is the thing that most people struggle with. Well, implementing the second part is also very simple, as you will see in today's code.

    Let's see the code. Here it is!



    The output of the above code will be as seen in the result section above.

    As most of you will realize, there are two maps, one centered at "Pune" and other at "Noida". Why I chose these two locations? Well, just like that!...The main issue of concern is how the maps appeared side-by-side and not one below the other as would be normal behavior of two "div" elements used in the same page. Now here is the trick! Check out the the first
tag. At the end of the line there is an attribute "float: left" which helps to align the contents of the "div" to the left!

    Omit the "float: left" attribute of the div tag and your maps will appear one below the other. Now, there would be many out there who would say, "Why not use the table?"..Well yes table can also be used to place the two maps side by side.

    Check out this space for more examples where there would be multiple maps on the same page! Do comment to let me know what you think about this post! Also, put in any requests for examples! Another thing is that, now that I am approaching a century of posts (have completed 84, including this one), do you have any suggestions? Do posts your feed-backs on the overall look and feel and content of the blog!
Labels:

Comments

  1. AnonymousNovember 26, 2012 at 12:25 PM

    Thank you so much for the tutorial and especially the code example! It answered the questions I was struggling with and made it crystal clear! Best regards to you and thanks again!

    ReplyDelete
  2. Russ DaveyNovember 29, 2012 at 10:37 AM

    Just wanted to say thanks for this - I had been messing around for hours trying to fix issues, in the end I followed this to the letter and my problems vanished. Thank you!

    ReplyDelete
  3. AnonymousJanuary 8, 2013 at 9:47 AM

    many thanks. this code is very simple to understand

    ReplyDelete
  4. AnonymousMarch 5, 2013 at 6:52 AM

    How to restructure this page in blogger

    http://directorypostingjob.blogspot.com/p/con.html

    ReplyDelete
    Replies
    1. Shreerang PatwardhanMarch 5, 2013 at 8:33 PM

      Hi...The link that you have shared throws the following error!
      "Sorry, the page you are looking for in this blog does not exist."

      Delete
  5. Miles RileyNovember 22, 2021 at 5:27 PM

    Great postt

    ReplyDelete

Post a Comment

Please leave your comments here...

Recommended for You

Where does Google get it's live traffic data from?

Referring to a post that I wrote earlier, Google’s - Live traffic Layer , ever wondered how Google collected this data? I was wondering the other day, how Google received live data to display it on their maps as a layer! I looked up the web and found something very interesting and am sharing the same with you all. As we all know, the traffic layer is available most accurately in several states in USA. Most major metro areas in the US have sensors embedded in their highways. These sensors track real time traffic data. Easy to miss at high speeds (hopefully anyway, traffic permitting), more commonly noticed may be the similar sensors that often exist at many busy intersections that help the traffic lights most efficiently let the most amount of people through. The information from these tracking sensors is reported back to the Department of Transportation (DOT). The DOT uses this data to update some of the digital signs that report traffic conditions in many metro areas. They als
17 comments
Read more

Geodesic Polyline

    Today we will have a look at a very interesting polyline example - "The geodesic polyline". Now the first question that will pop is "What is geodesic?". Mathematically, geodesic means the shortest line between two points on a mathematically defined surface, as a straight line on a plain or an arc of a great circle or sphere.     The next question after reading the above definition is clearly, "Why do we need geodesic polylines?" and that would be followed up with "What is this Great Circle?". We will discuss this first, before we move on to the actual example today. The example is very very similar to the normal polyline example, with just a small change.     Having said so, I will now try to explain why we need a geodesic polyline? The shortest distance between two locations on the earth is rarely a straight line as the earth is roughly spherical in nature. So any two points on the earth, even if they are very close lie on a curve and n
5 comments
Read more

GIS Technology to identify all properties in BBMP Limits

          The Bruhat Bangalore Mahanagara Palike (BBMP) has for the last two years, been in the process of conducting a massive exercise to map the 13.87 lakh properties in the 198 wards in the city. Geographical Information System (GIS) has proven to be an effective tool for analysing and displaying thematic maps of all the roads for proper evaluation and correction of zones.            As of now, 11 lakh properties have come under the tax net. The aim of this programme, which is perhaps the first such exercise being conducted in the country on such a large scale, covering 800 square km, is to bring all properties under the tax net and ensure that the BBMP has accurate information pertaining to the properties’ dimension, built-up area, land use and classification. The process of validation of GIS maps will be completed in January 2011.           The process uses satellite digital maps of the BBMP area to generate a vector map from the information obtained. These high r
5 comments
Read more

Playing with the markers and info window bubbles...

    In the last few posts, we have seen some marker examples and some information window examples. Now, lets do something interesting combining these two things. Just writing that "This is an info window" in the information bubble is not very interesting! And I know this...Have gone through the same phase!     So, today we will do something interesting! We will display the latitude- longitude co-ordinates of the point that the user clicks on the map! Doing this is not at all complex! Copy paste the following code and you will see for yourself a map coming to life!     The output of the above code looks as seen in the result section above! If you have any queries regarding the above code please comment on the blog post or feel free to contact me at my mail ID .
3 comments
Read more

Google Street View Image API

    Street View is one of most used feature of the Google Maps and why not? You can actually see any part of the world as if you are visiting the place at that very moment. And now with the Google Street View Image API, you don't even need to carry a camera with you to the places you visit. You can take-in all the scenic beauty without even bothering about clicking a single picture. You can come back from your vacation and get a few images using the Google Street View Image API and show those images to your friends and relatives. Create an album of high definition images and go ahead and share it on Facebook for your friends to have a look.     Using the Google Street View Image API is very simple and anybody can make use of it without any programming knowledge required. I will walk you through the entire process of effectively using the Google Street View Image API. So if you are set, let's go on an amazing ride across the globe with the Google Street Views.     The Go
1 comment
Read more