Skip to main content

Rail Radar - Map your Train Live!


    Rail Radar - An interactive map that allows users to watch the movements of trains that are currently running in India. This means that you can now know the status of your trains live! Rail Radar is a real time tracker of the Indian Railways passenger trains. This live tracker is shown on our very own Google Maps and this long awaited system is a result of a collaboration between the CRIS - Center for Railway Information System and RailYatri.in.
    Since this is a live tracking system of the Indian Railways, a few questions that will pop up in the minds who have ever travelled by railways will be - "Is this system really reliable? Is the data accurate? Can I trust the Rail Radar?" Well, the system is reliable and you can trust the data since the information and intelligence behind the Rail Radar is extracted and harnessed from volumes of data from the official Indian Railway's train running operational data. With regards to accuracy – this is fairly accurate in the normal running scenarios. However, there are several factors that can affect a train while it is on its route. Weather, breakdowns, congestions, local control-office directives, and more. RailRadar tries to continuously update this information. However, since the data on the Radar is displayed few minutes later than the actual, the tourists should double check the train running information using the traditional train status search mechanism – also offered by TrainEnquiry.com

    At present the Rail Radar is configured to refresh every 5 minutes. For security and regulatory reasons, the information published  on the Rail Radar is delayed by 5 or more minutes. Apart from this, the system has to do a lot of data crunching before the data is updated on the map. This to contributes to the delay.

    The Rail Radar system has a really cool feature in it. If the system is able to capture the location of the request based on the IP, then the Google Map that is used in the system pans to that location. Now; isn't that cool? So, if you are in Pune, then chances are that when you open up Rail Radar in your browser, you will be taken to Pune, which happens to be a junction in Maharashtra state. It also shows the number of trains that are currently active and also the percentage of trains that are delayed.

    Well my take on the entire application...
  • The Indian Railways needed just such a kind of system, since India has got the largest network of railways in Asia.
  • This system is really a  big boon to the frequent train travellers, who have experienced the agony of waiting for delayed trains at railway stations.
  • The application makes use of really cool Google Maps Satellite view and shows train icons as map markers.
  • Clicking on the train icon, shows you the details of the particular train and a simple mouse over gives you the name of the train you are looking at.
Train Details - On Mouse-over
 
Train Details - On Click
 
  • The User Interface(UI) of the application is not so good, and with 2 big adds at the bottom and bottom-right will be a big turn off for visitors.
  • Overall a very good and much required application for the people travelling by railways in India.
    You can visit the application at Rail Radar and take the benefits of this fabulous application. Do share with us your take on this brand new Google Maps powered live train-tracking application - the Rail Radar.
Labels:

Comments

Post a Comment

Please leave your comments here...

Recommended for You

Playing with the markers and info window bubbles...

    In the last few posts, we have seen some marker examples and some information window examples. Now, lets do something interesting combining these two things. Just writing that "This is an info window" in the information bubble is not very interesting! And I know this...Have gone through the same phase!     So, today we will do something interesting! We will display the latitude- longitude co-ordinates of the point that the user clicks on the map! Doing this is not at all complex! Copy paste the following code and you will see for yourself a map coming to life!     The output of the above code looks as seen in the result section above! If you have any queries regarding the above code please comment on the blog post or feel free to contact me at my mail ID .
3 comments
Read more

Ground Truth - How Google Builds Maps

    Todays's article is cross posted from The Atlantic 's Tech section. The article was posted by Alexis Madrigal who is a senior editor at The Atlantic , where he oversees the Technology channel. So, thanks to The Atlantic and Alexis Madrigal, we will have an exclusive look inside Ground Truth , the secretive program to build the world's best accurate maps.     Behind every Google Map, there is a much more complex map that's the key to your queries but hidden from your view. The deep map contains the logic of places: their no-left-turns and freeway on-ramps, speed limits and traffic conditions. This is the data that you're drawing from when you ask Google to navigate you from point A to point B -- and last week, Google showed me the internal map and demonstrated how it was built. It's the first time the company has let anyone watch how the project it calls GT, or "Ground Truth," actually works.     Google opened up at a key moment in its evo
6 comments
Read more

Panoramio Layer...

    Let's start with the obvious question first...What is Panoramio? Panoramio is a geolocation-oriented photo sharing website. Panoramio website was officially launched on October 3, 2005 by Joaquín Cuenca Abela and Eduardo Manchón Aguilar, two Spanish entrepreneurs and was acquired by Google in July 2007.     Accepted photos uploaded to the site can be accessed as a layer in Google Maps, with new photos being added at the end of every month. The site's goal is to allow Google Maps and Google Earth users to learn more about a given area by viewing the photos that other users have taken at that place. The website is available in several languages and can be viewed here .     You may add photos from Panoramio as a layer to your maps using the PanoramioLayer object. The PanoramioLayer renders a layer of geotagged photo icons from Panoramio on the map as a series of large and small photo icons. Let us now have a look at the following code to understand the concept in more det
2 comments
Read more

Map Loading...

    The blank web page seems so boring and dull when the map is still loading. You will come across such a situation quite often where you will be having a slow internet connection! We cannot do anything about the slow internet connection, but we can surely avoid the dull blank web-page by using a simple trick. We can place a "loading" image at the center of the web page so that the page doesn't look blank! An image like this:             The following code will show you how this can be done and here it is!     As you all can see the code is very very simple and the output will look as seen in the results section above. The image below shows the loading stage of the map.       Do let me know what you think about the examples shared here! Do leave your comments here! Till the next example, happy mapping!
4 comments
Read more

Where does Google get it's live traffic data from?

Referring to a post that I wrote earlier, Google’s - Live traffic Layer , ever wondered how Google collected this data? I was wondering the other day, how Google received live data to display it on their maps as a layer! I looked up the web and found something very interesting and am sharing the same with you all. As we all know, the traffic layer is available most accurately in several states in USA. Most major metro areas in the US have sensors embedded in their highways. These sensors track real time traffic data. Easy to miss at high speeds (hopefully anyway, traffic permitting), more commonly noticed may be the similar sensors that often exist at many busy intersections that help the traffic lights most efficiently let the most amount of people through. The information from these tracking sensors is reported back to the Department of Transportation (DOT). The DOT uses this data to update some of the digital signs that report traffic conditions in many metro areas. They als
17 comments
Read more